All of our key covers are custom made of 1/4" "cell cast" optically clear, acrylic plastic. We will use 1/8" acrylic only on custom orders. The covers are designed for each of the key models. All covers include an exit hole for the cord. We do not sell a general size cover.
The sides and tops use a "box end" type system to keep them together. We use no glue which will cause the contacts to foul and will attack the finish. We use a solvent to soften the plastic and then clamps are used to press the pieces together. The solvent is allowed to evaporate and there is no residue.
We engrave the callsign on the inside of the top and a serial number also on the inside of the rear, if so desired.
We can make the covers in clear, translucent - gray, red or blue and an opaque black. There is a small extra charge for the colored plastic covers.
Tom - AB6Z is the key cover designer. If you have questions or want a custom design, you are welcome to email/call
at or 601-966-1064.
Select a manufacturer :
CLICK ON THE MANUFACTURER OF YOUR DEVICE AND THEN THE MODEL OF YOUR KEY. IF YOUR KEY DOES NOT APPEAR ON THE WEBSITE, WE CAN STILL BUILD A COVER FOR YOU. WE WILL NEED YOU TO DETERMINE SOME CRITICAL MEASUREMENTS ON YOU KEY AND FILL OUT THE BELOW FILLABLE FORM (DOWNLOADABLE) AND EMAIL IT TO US . WE WILL ALSO NEED EXTRA TIME TO MAKE THE DESIGN AND THEN BUILD IT.